Fireproof Vinyl Plastic SPC Flooring Luxury Hardwood DIY Installation

Hardwood Style LVT Vinyl Flooring Recyclable Material Fireproof

LVT Vinyl Flooring Specification

Why choose LVT vinyl flooring 

1) Waterproof and Damp proof

As the main component of SPC is stone powder, so it performs well with water, and mildew will not happen with high humidity.

2) Fire Retardant

According to the authorities, 95% of the victims were burned in the fire caused by the toxic fumes and gases. The fire rating of SPC flooring is NFPA CLASS B. Flame retardant, not spontaneous combustion, leave the flame automatic out in 5 seconds, won't produce toxic of harmful gases.

3) No Formaldehyde

SPC is high quality stone power & PVC resin, without harmful material such as benzene, formaldehyde, heavy metal.

4) No Heavy Metal, No Lead Salt

The Stabilizer of SPC is Calcium zinc, no lead salt heavy metal.

5) Dimensionally Stable

Exposed to 80 degree heat, 6 hours---Shrinkage less than 0.1%; Curling less than 0.2mm

6) High Abrasion

SPC flooring has a transparent wear-resisting layer, whose revolution is up and higher than 10000 turns.

Your new LVT Vinyl is the newest generation of high-quality resilient flooring. It has a unique interlocking-edge design for easy installation. Simply follow the steps and you will experience how easily this product is installed in just a few hours. The wear layer has millions of ceramic microspheres that make a very durable and resistant flooring option.

SPC Vinyl Flooring Construction

1. UV Coating – The UV coating protects against excessive wear, provides superior cleanability, and provides superior stain resistance.

2. Wear Layer – The wear layer is the top coating on the floor that is transparent. This adds scratch and stain resistance to the vinyl plank.

3. Decor Film – Each floor will have a thin layer of vinyl attached to it. This layer is waterproof and will contain the pattern, texture and look of the floor.

4. Core – The core is made by combining limestone powder and stabilizers to create a dimensionally stable and waterproof core.

6 steps to install LVT vinyl flooring

1: from the corner of the paving, the open slot facing the wall, using a beau gasket to keep the floor and the wall of the 6mm distance.

2: insert the mother slot at the end of the second plate end into the slot at the end of the front plate at 45-60 degrees, and gently press it to close it.

3: to complete the first row of paving with this analogy, the distance from the length is not enough to use the ruler and blade to cut the floor and splice the floor.

4: insert the mother slot at the side of the second row floor into the first row of floor public grooves and gently press it to complete close close, followed by the same way as the first row of paving.

5: by analogy to the last row

6: floor turning groove facing the wall, with a blade and cut off the front of the overlapping part, leaving part of the installation according to the normal procedure